Telephone
86-888-8888
Telephone
86-888-8888
2. SKZ Kangzhen intelligent 8-bar robot 1. Check the change of the clearance of each bearing and adjust or replace it if necessary. 2. Cut off the bearing seat of the mechanism and add 3 #lithium-based lubrication once a month. 3. The sprocket in the feed bracket is lubricated with oil. Add oil to the sprocket transmission mechanism once a month. Oil model: Add SAE20 grade oil below 5 ° C in winter, and add SAE30 grade oil above 5 ° C in other seasons. The oil position can be measured by probe and observation method to submerge the lowest sprocket tooth. 4. Check the oil level and oil quality of gear reducer gear oil every three months. The normal oil level is two-thirds of the oil window. If it is insufficient, it needs to be replenished; if it is found that the gear oil has deteriorated, it needs to be replaced immediately. After the new machine is used for one month, the gear reducer lubricating oil must be completely replaced with new oil. The gear reducer uses No. 220 mechanical gear oil. 5. The compressor lubricating oil should be replaced every 500-800 hours of operation of the air compressor.