Inside the workshop

Manufacturing

How a table moves through the workshop: frame and leg joinery, slate matching, cushion and cloth work, pocket and marking checks, then protective packing for the destination.

Get a Quote Certificate

Our Manufacturing Capabilities

With over 15 years of experience in agricultural spraying equipment, AgroSpray operates a modern 45,000 m² production facility with more than 300 skilled workers and a monthly capacity of 150,000 sprayers.

Production Lines

Plastic molding: in-house injection and blow molding of UV-resistant HDPE tanks from 1L to 25L.
Pump assembly: automated lines for diaphragm and plunger pumps with 100% pressure testing.
Battery packs: certified 12V lithium battery production with charge-discharge cycle testing.
Final assembly: six assembly lines with in-line leakage and spray pattern inspection.

Quality Control

Our ISO 9001 quality system covers incoming material inspection, in-process checks and pre-shipment testing. Every sprayer is pressure tested and leak tested before packing, and batch samples undergo endurance testing in our laboratory.

R&D and Customization

Our engineering team develops new models every year and supports OEM/ODM projects from drawing to mass production, including custom molds, logos, colors and packaging designed for your market.

We welcome factory audits and video inspections. Contact us to schedule a visit or request our latest capability report.

Process

Six stages, one approved sample

01 Component intake
Frame stock, slate sections, cushions, cloth, pockets and hardware inspected against the component specification.
02 Frame and leg joinery
Frames and legs cut, jointed and squared, then checked for flatness before the bed is set.
03 Bed assembly
Slate sections matched for thickness, set on the frame and adjusted until flat.
04 Cushions, rails and cloth
Cushions fitted and rebound checked across the rail; cloth stretched and aligned to the pocket jaws.
05 Pockets and markings
Pocket profiles, jaw openings and baulk or spot markings measured against the agreed template.
06 Packing and documents
Protective packing for slate and frames, hardware sets, assembly drawings and export paperwork.

Capabilities

What we can adapt for your order

Size and game

12 ft and 10 ft snooker, English billiards, 9 ft and 8 ft American pool, carom and multi-game tops.

Slate

Sectioned slate matched for thickness and flatness, or your own slate specification where preferred.

Cloth

Wool and wool-blend cloth in your colour, with nap direction and printing agreed before fitting.

Pockets and cushions

Club, tournament and pool pocket profiles with cushion hardness and rebound agreed to your template.

Frames and finishes

Rosewood, mahogany, oak and painted finishes, with leg styles and rail details to your reference.

Branding and packing

Rail badges, leg plates, cloth printing, carton marks and hardware sets prepared for your market.

Quality control

Checked against the approved sample at every stage

The signed-off sample is the reference for the whole order. The table below shows where each control sits in the process; detailed reports are available with your order.

Stage	What is checked	Reference
Component intake	Material, dimensions, finish and quantity	Component specification
Frame and bed	Flatness, squareness and slate match	Approved sample
Cushions and cloth	Rebound, tension, rail alignment and nap direction	Agreed test plan
Pockets and markings	Jaw openings, profiles and marking positions	Signed drawing
Final inspection	Sampled from packed tables before release	Inspection report

Test methods and acceptance criteria are agreed per order and confirmed in writing before production.

Next step

Send us a brief and we will confirm feasibility

Share a reference table, drawing or target specification — we reply with options, sampling steps and timing.

Get a Quote Solutions